| T O P I C R E V I E W |
| Sarita |
Posted - 04/06/2013 : 21:10:28
I have the PC Stitch 10 program. It was working okay until recently. When I try to use the toolbar icons inside of the program, the program ends and I'm immediately taken to my start up page. Has anyone ever experienced this? Thanks.
|
| 4 L A T E S T R E P L I E S (Newest First) |
| andy.mrfb |
Posted - 05/30/2013 : 18:59:20
Does anyone know why my program has suddenly starting malfunctioning.
When pointing at the pattern the colours are not coming up in the bottom left hand corner. When printing, some stitches are printing as blank. I have updated, reloaded disc etc with no improvements. This is really frustrating as now it is un-usable. The program I purchased is PCStitch 9. Even after updating to PCStitch 10 the problem is the same. I have contacted PCStitch technical help 3 times but have received NO reply or help. |
| Dragonlair |
Posted - 04/07/2013 : 16:08:31
You won't lose your patterns! They are kept in a different area of the hard drive (or even a flashdrive or CD/DVD or wherever or even another hard drive)but they are NOT kept with the software.
Diane
There is no such thing as a stupid question
|
| Sarita |
Posted - 04/07/2013 : 12:08:09
A couple of weeks ago I did remove the program and reinstalled it. It worked for a few seconds and then it did the same thing. I don't have the latest version of PC Stitch 10. I don't want to lose any of my patterns. I have so many. I'll try a reboot too. Thanks for your help :-)
|
| Dragonlair |
Posted - 04/06/2013 : 22:32:54
I would try a reboot and if that doesn't clear it up, try to download the latest version and re-install over the current install. It won't affect the license.
If that doesn't work, send a message to Mark.
Diane
There is no such thing as a stupid question
|
